MPQ4272GVE-0000-AEC1-P

MPQ4272 integrates dual-channel, monolithic step-down converters with an I2C interface. Each channel can deliver up to 3A of output current across a wide input supply range, with excellent load and line regulation. The MPQ4272 is designed for USB charger applications with dual ports. Both channels can work with an external USB power deliver (PD) controller. The I2C interface and one-time programmable (OTP) memory provide flexibility with configurable features. Fault condition protections include current limiting, output over-voltage protection (OVP), and thermal shutdown (TSD). The MPQ4272 requires a minimal number of readily available, standard external components. It is available in a QFN-21 (4mmx5mm) package.

• Dual 3A or shared 6A buck converter, supports USB PD 3.0
• Wide 4V to 36V operating input voltage range
• 1V to 21V output voltage range with 12.6mV resolution, VOUT scale loop = 0.0635
• Selectable 250KHz, 420KHz, 1.1MHz, or 2.1MHz switching frequency
• Frequency spread spectrum, low-dropout mode, line drop compensation
• Accurate adjustable CC output current limit (50mA/step via the I2C)
• 22mohm high-side and 26mohm low-side low RDS(ON) internal buck power MOSFETs
• I2C interface and overtemperature protection (OTP) with PMBus-compatible parameters
• Available in AEC-Q100 Grade 1, load-shedding alert, EN shutdown active discharge
• VBUS isolation N-channel MOSFET gate driver, battery short-to-ground protection

Hinweise

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.