LPC1785FBD208K

The LPC1785FBD208K is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 120MHz. The ARM Cortex-M3 is a next generation core that offers better performance than the ARM7 at the same clock rate and other system enhancements such as modernized debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and has a Harvard architecture with separate local instruction and data buses, as well as a third bus with slightly lower performance for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branches. The device adds a specialized flash memory accelerator to accomplish optimal performance when executing code from flash. The device incorporates 256kB internal flash, 80kB internal RAM, 4kB EEPROM and 165 general-purpose I/O pins.

• ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
• Multilayer AHB matrix interconnect
• Split APB bus
• Cortex-M3 system tick timer, including an external clock input option
• Standard JTAG test/debug interface as well as serial wire debug and serial wire trace port options
• Embedded trace macrocell (ETM) module supports real-time trace
• Boundary scan for simplified board testing
• Non-maskable Interrupt (NMI) input
• LCD controller - Supporting both super-twisted nematic (STN) & thin-film transistors (TFT) displays
• External memory controller (EMC)
• 8-channel General purpose DMA controller (GPDMA)
• Ethernet MAC with MII/RMII interface and associated DMA controller
• USB 2.0 Full-speed dual-port device/host/OTG controller
• SD/MMC memory card interface
• Windowed watchdog timer (WWDT)
• Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down
• The wake-up interrupt controller (WIC)
• Processor wake-up from power-down mode
• Brownout detect with separate threshold for interrupt and forced reset
• On-chip power-on reset (POR)
• On-chip crystal oscillator with an operating range of 1MHz to 25MHz
• 12MHz Internal RC oscillator (IRC) trimmed to 1% accuracy
• Versatile pin function selection feature allows many possibilities
• Unique device serial number for identification purposes

Anwendungen

Kommunikation & Netzwerke, Industrie, Medizinelektronik, Automatisierung & Prozesssteuerung, HLK, Unterhaltungselektronik, Fahrzeugelektronik, Audio, Sicherheitstechnik, Motorantrieb & -steuerung

Warnungen und Hinweise

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.