Ihr Bedarf geht darüber hinaus?
Menge | |
---|---|
100+ | € 1,270 |
250+ | € 1,200 |
500+ | € 1,040 |
1000+ | € 0,894 |
2500+ | € 0,813 |
Produktspezifikationen
Produktbeschreibung
STMPS2252TTR is an enhanced dual-channel power switch. This power distribution switch is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. This device incorporates 100mohm MOSFET high-side power switches for power distribution systems that require multiple power switches in a single package. Each switch is controlled by an independent logic enable input. When the output load exceeds the current limit threshold or a short is present, this device limits the output current to a safe level by switching into a constant current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently.
- Thermal protection, independent short-circuit protection with overcurrent logic output
- Operating range from 2.7V to 5.5V
- CMOS and TTL compatible inputs
- 2.5ms typical rise time, undervoltage lockout
- 13µA maximum standby supply current
- Ambient temperature range from -40°C to 85°C
- 8KV ESD protection, reverse current protection, fault blanking
- MSOP8 package
- 500mA current limit, active high enable
- Static drain source ON state resistance is 120mohm typ (VI = 2.7V, TJ = 25°C)
Warnungen und Hinweise
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Technische Spezifikationen
High-Side
5V
0.12ohm
8Pin(s)
Aktiv-High
-40°C
-
MSL 1 - unbegrenzt
-
4Kanäle
500mA
MSOP
Ja
2Ausgänge
85°C
-
No SVHC (21-Jan-2025)
MSOP
Technische Dokumente (2)
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Malaysia
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat