Benachrichtigen Sie mich, wenn das Produkt wieder vorrätig ist
Menge | |
---|---|
100+ | € 1,040 |
250+ | € 0,992 |
500+ | € 0,873 |
1000+ | € 0,872 |
2500+ | € 0,855 |
Produktspezifikationen
Produktbeschreibung
The LM2940IMP-10/NOPB is a 10V fixed output low-dropout (LDO) Linear Regulator feature the ability to source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VIN - VOUT ≤3 V). The device and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load.
- Output current in excess of 1A
- Output voltage trimmed before assembly
- Reverse battery protection
- Internal short circuit current limit
- Mirror image insertion protection
- P+ Product enhancement tested
- Green product and no Sb/Br
Anwendungen
Fahrzeugelektronik, Automatisierung & Prozesssteuerung, Industrie, Power-Management
Technische Spezifikationen
Fest
26V
10V
-
Positiver Ausgang
1A
500mV
SOT-223
-40°C
10V 1A LDO Voltage Regulators
No SVHC (27-Jun-2018)
0V
1Ausgänge
10V
-
1A
500mV
Oberflächenmontage
3Pin(s)
85°C
MSL 1 - unbegrenzt
Technische Dokumente (1)
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Malaysia
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat